How to Install Electromagnetic Door Locks?
With a commercial space, you definitely want to know everyone who comes in, rather than letting strangers come and go at will. One of the best ways to ensure this is to install a reliable and secure access control system on your door.
Electromagnetic door locks are one of the most reliable lock options. Not only are they easy to use, but they are also simple to install.
What is an electromagnetic door lock?
Electromagnetic door locks keep entrances or exit secure with a power source. It is also called a magnetic lock.
The electromagnetic door lock has two main components, the armature plate, and the coil assembly. Both components are magnetized when current is passed through the door lock. The more coils the electromagnetic lock has, the stronger the holding force. This is also how electromagnetic door locks stay locked and unlocked.
How to install an electromagnetic door lock?
The installation of electromagnetic door locks is simpler than other smart lock installations. When preparing for door installation, only drill holes in the frame. It’s important to note that you may need a permit to install solenoid doors in residential or commercial spaces, so check your local municipality’s requirements before installing.
The electromagnet part of the lock (coil) needs to be mounted on the door frame and the armature plate part on the door. And you need to make sure you have a reliable power supply, only then, the electromagnetic door lock can work properly.
What if the power goes out?
As mentioned above, an electromagnetic door lock is a power-dependent access control system. When a power outage occurs, or other unexpected events cause a power outage, the electromagnetic door lock will be automatically unlocked to facilitate escape.
But it’s also a security risk, as criminals can power off commercial spaces and then sneak into interior spaces for theft or vandalism.
How to avoid automatic unlocking after power failure?
The best way is to not use the electromagnetic door lock but use the Vanma electronic lock access control system.
The locks in this system are passive electronic locks, the power is provided by the key and does not need to be provided by the commercial space. So even in the event of a power outage, the Vanma electronic lock access control system will not be affected.
In addition, its installation is also very simple, it does not even require drilling, and it is as simple as installing a mechanical lock.
As an access control system, Vanma electronic locks have a flexible authorization function to prevent unauthorized employees or strangers from entering designated areas. You can also unlock multiple locks with one key. In commercial spaces, employees only need to carry one key to open all the locks under the authority, which is more convenient.
